Naturali Hydrating Oil Control Face Wash

DESCRIPTION

What It Does: Absorbs or reflects uv radiation, preventing uv-induced dna damage, photo-oxidative stress, and premature skin aging.

Why It's Used: Uv filters are the active ingredients in sun protection — without them, formulations cannot make spf claims or prevent solar-induced skin damage.

How It Works: The uv-absorbing chromophore undergoes photoexcitation by uv photons, then dissipates the absorbed energy through thermal relaxation (chemical filters) or photon scattering/reflection (physical filters), preventing photon penetration to skin cells.

Typically Found In: Sunscreens,moisturizers with spf,foundations with spf

TECHNICAL DETAILS

Primary Category: Uv filters

Secondary Functions: Skin-protecting

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.5–25% (within regulatory limits)

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Synthetic uv filter; no animal components.

SKIN COMPATIBILITY

Irritancy Rating: 1

Comedogenicity Rating: 0

Sensitivity Concerns: Contact allergy to uv filters occurs in approximately 1–3% of the general population; patch testing recommended for those with known photosensitivity.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Regulatory approval required per market (eu annex vi, fda otc monograph, etc.). generally non-irritating at approved concentrations.

Works Well With: Other uv filters,antioxidants,emollients

Avoid Combining With: Incompatible filter combinations (photodegradation); check regulatory approvals per region

SCIENTIFIC NOTE

Uv filters operate through two mechanisms: organic/chemical filters absorb uv photons through electronic excitation (π→π* transitions in conjugated systems), then dissipate energy via thermal relaxation; inorganic/physical filters (tio2, zno) scatter and reflect photons through mie scattering (particle size 50–300 nm) and band gap absorption. spf is measured in vivo (iso 24444) as the ratio of minimal erythema doses with and without sunscreen.

Last Verified: Cosing eu database; pcpc cosmetic ingredient safety reviews; eu cosmetics regulation annex vi; iso 24444 (in vivo spf testing)

Primary Sources: 2025-01-15

DESCRIPTION

What It Does: Delivers targeted skin-conditioning or bioactive benefits through a specific mechanism of action suited to the formulation's intended purpose.

Why It's Used: Specialty actives address specific skin concerns through targeted molecular mechanisms, providing efficacy beyond what base formulation ingredients alone can achieve.

How It Works: The bioactive compound interacts with specific molecular targets in skin cells or the extracellular matrix — enzymes, receptors, structural proteins, or signaling molecules — triggering beneficial biological responses.

Typically Found In: Serums,treatments,moisturizers,specialty products

TECHNICAL DETAILS

Primary Category: Specialty actives

Secondary Functions: Skin-conditioning,anti-aging

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.01–5%

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Specialty active ingredient; check individual sourcing for vegan status.

SKIN COMPATIBILITY

Irritancy Rating: 1

Comedogenicity Rating: 0

Sensitivity Concerns: Low sensitization potential at recommended use concentrations.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Well-characterized cosmetic ingredient with established safety profile. generally non-irritating at typical use concentrations. suitable for leave-on and rinse-off cosmetics.

Works Well With: Niacinamide,hyaluronic acid,vitamin c,peptides

Avoid Combining With: Incompatible with oxidizing agents; check ph stability

SCIENTIFIC NOTE

Specialty actives typically work through enzyme inhibition (e.g., tyrosinase inhibition for brightening, mmp inhibition for anti-aging), receptor activation (e.g., retinoid receptors, ppar-γ for barrier genes), or transcription factor modulation (e.g., nrf2 for antioxidant gene upregulation). structure-activity relationships determine potency and selectivity.

Last Verified: Cosing eu database; pcpc cosmetic ingredient safety reviews; ingredient-specific safety and efficacy literature

Primary Sources: 2025-01-15

DESCRIPTION

What It Does: Provides the complete fragrance profile contributing to product sensory experience and consumer appeal.

Why It's Used: Fragrance is a major consumer purchase driver — up to 70% of consumers make purchasing decisions partially based on product scent.

How It Works: Fragrance blends interact with olfactory receptors providing the sensory profile — complex mixtures activate multiple receptor types for rich, multidimensional scent experiences.

Typically Found In: All fragrance products

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: Standard use levels

SOURCING & ETHICS

Vegan Status: Conditional

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Ifra guidelines set usage limits for fragrance ingredients based on skin sensitisation and phototoxicity assessment for each application category.

Last Verified: Eu regulation 1223/2009 annex iii,ifra standards,fragrance allergen declaration requirements

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Glycerin pulls water from the environment and deeper skin layers into the outer skin layer (epidermis), boosting moisture levels and keeping skin soft, smooth, and plump.

Why It's Used: It is used in virtually every moisturizer, serum, and cleanser because it is highly effective at hydrating skin, is well-tolerated by all skin types, and enhances the texture and spreadability of formulations.

How It Works: As a humectant, glycerin forms hydrogen bonds with water molecules, trapping them in the skin. it also reinforces the skin barrier by integrating into lipid structures between skin cells.

Typically Found In: Moisturizers,serums,cleansers,toners,sheet masks,sunscreens,body lotions,shampoos,conditioners

TECHNICAL DETAILS

Primary Category: Humectant

Secondary Functions: Skin barrier support,emollient,solvent

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 1%–30% (typical: 3–10%)

SOURCING & ETHICS

Vegan Status: Yes – plant-derived (coconut, soy, palm) or synthetic

Halal Status: Yes – when plant-derived or synthetic; verify source with supplier

Source Notes: Derived from plant oils via hydrolysis or saponification; synthetic versions also available. palm-derived glycerin carries sustainability concerns.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low; non-irritating at all standard concentrations

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Extremely rare allergic reactions; generally safe for all skin types including sensitive and baby skin

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Widely recognized as safe. ewg hazard score: 1. no significant concerns for irritation, sensitization, or toxicity at typical concentrations (up to 50%).

Works Well With: Hyaluronic acid,ceramides,niacinamide,panthenol,urea,peptides,retinol,ahas/bhas

Avoid Combining With: No known incompatibilities at standard concentrations

SCIENTIFIC NOTE

Glycerin is an endogenous skin component found naturally in the stratum corneum. aquaporin-3 channels in keratinocytes facilitate glycerin transport, making it integral to natural skin hydration pathways.

Last Verified: Cosing database,cir safety assessment,ewg skin deep,inci decoder

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Activates trpm8 cold thermoreceptors for intense cooling sensation and analgesic activity.

Why It's Used: The most potent cosmetic cooling agent – direct trpm8 agonist providing cooling sensation without actual temperature reduction for refreshing and analgesic formulations.

How It Works: Potent trpm8 (menthol receptor/cold thermosensor) agonist – activation at room temperature mimics cold sensation without actual cooling. anti-pruritic via trpm8 activation competing with itch c-fiber signaling. antimicrobial via membrane disruption.

Typically Found In: Cooling products,scalp treatments,oral care,pain relief,foot care,after-sun

TECHNICAL DETAILS

Primary Category: Active ingredient – cooling sensory terpenoid

Secondary Functions: Redness reduction,anti-inflammatory,calming

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.1%–2%

SOURCING & ETHICS

Vegan Status: Yes – from mentha piperita or synthetic

Halal Status: Yes

Source Notes: Plant-derived extract or synthetic.

SKIN COMPATIBILITY

Irritancy Rating: 2/5 – low to moderate; potential sensitizer

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Non-irritating; ideal for reactive and sensitive skin.

Safe for Sensitive Skin: Avoid near eyes. use with caution at concentrations above 1% for sensitive skin.

SAFETY & COMPATIBILITY

Safety Profile: Eu max 4.5% (leave-on); regulations vary by application site. avoid on infants' face.

Works Well With: Ceramides,panthenol,allantoin,hyaluronic acid,centella asiatica

Avoid Combining With: No significant incompatibilities

SCIENTIFIC NOTE

Menthol's exceptional cooling potency stems from its ec50 for trpm8 activation of approximately 10μm (vs camphor's ec50 of ~5mm – 500× lower potency). this 500× potency advantage explains why even tiny concentrations of menthol provide intense cooling, while much higher concentrations of camphor are required for equivalent sensation.

Last Verified: Cosing database,mckemy et al. menthol trpm8 discovery,cir safety assessment

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides documented cosmetic activity from polyquaternium-44.

Why It's Used: Polyquaternium-44 delivers formulation value through its specific biological activity and established safety and efficacy.

How It Works: Source: polyquaternium-44. mechanism: documented in cosmetic literature. safety: cosing-reviewed. standard cosmetic use concentrations.

Typically Found In: Skin care formulations,active products

TECHNICAL DETAILS

Primary Category: Active ingredient – antioxidant

Secondary Functions: Free radical scavenging,anti-aging

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.1%–5%

SOURCING & ETHICS

Vegan Status: Conditional

Halal Status: Yes

Source Notes: Plant-derived extract or synthetic.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Non-irritating; well-tolerated.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Excellent safety profile. ewg score: 1.

Works Well With: Vitamin c,vitamin e,ferulic acid,spf,other antioxidants

Avoid Combining With: No significant incompatibilities

SCIENTIFIC NOTE

Polyquaternium-44 provides cosmetic activity through its characteristic mechanism. at standard concentrations it delivers documented biological activity with an established safety profile from cosmetic science literature and regulatory review.

Last Verified: Cosing database,polyquaternium-44 technical literature

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides humectant and solvent functionality from sustainable corn-based fermentation.

Why It's Used: Bio-based propylene glycol alternative from renewable corn — propanediol provides equivalent functionality to propylene glycol with sustainable renewable feedstock and superior skin feel.

How It Works: Two oh groups provide humectant water binding. excellent solvent for fragrances, actives, and preservatives. mild antimicrobial from diol structure for preservative system boosting. renew corn fermentation origin (dupont zemea process). better skin feel than propylene glycol — less sticky.

Typically Found In: Virtually all cosmetic categories as pg alternative

TECHNICAL DETAILS

Primary Category: Functional ingredient – humectant

Secondary Functions: Tewl reduction,skin plumping

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 1%–20%

SOURCING & ETHICS

Vegan Status: Yes – from corn sugar fermentation

Halal Status: Yes

Source Notes: Synthetic or naturally derived. excellent aqueous solubility.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Non-irritating; suitable for all skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Excellent safety profile. ewg score: 1.

Works Well With: Ceramides,emollients,occlusives,glycerin,hyaluronic acid

Avoid Combining With: No significant incompatibilities

SCIENTIFIC NOTE

Propanediol's dupont tate & lyle bio products 'zemea' process ferments corn sugar to 1,3-propanediol using engineered e. coli — one of the first commercially viable bio-fermentation routes to a cosmetic diol previously made only from petroleum. the renewable route produces chemically identical 1,3-propanediol while reducing carbon footprint by approximately 40% vs petrochemical synthesis.

Last Verified: Cosing database,dupont tate & lyle zemea technical data,cir safety assessment

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Attracts and retains moisture providing skin softening and hydration.

Why It's Used: Widely used, cost-effective humectant and formulation ingredient in moisturizers, toothpastes, and personal care.

How It Works: 6 hydroxyl groups provide strong water binding through hydrogen bonding. metabolized slowly by skin as an osmolyte.

Typically Found In: Moisturizers,body lotions,toothpaste,shampoos,many personal care products

TECHNICAL DETAILS

Primary Category: Functional ingredient – sugar alcohol humectant

Secondary Functions: Formulation solvent,viscosity modifier

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 1%–30%

SOURCING & ETHICS

Vegan Status: Yes – plant-derived (corn, apples) or synthetic

Halal Status: Yes

Source Notes: Produced by catalytic hydrogenation of glucose. derived from corn starch or other carbohydrate sources. gras food-approved.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Non-irritating; suitable for all skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Excellent safety profile. ewg score: 1.

Works Well With: Ceramides,emollients,occlusives,glycerin,hyaluronic acid

Avoid Combining With: No significant incompatibilities

SCIENTIFIC NOTE

Sorbitol's osmolyte function in cells (accumulates in response to osmotic stress) suggests it may provide protection to skin cells under dehydrating environmental conditions, complementing its well-established surface humectant activity.

Last Verified: Cosing database,cir safety assessment,ewg skin deep

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides the universal solvent and vehicle for water-soluble actives and the continuous phase of all o/w emulsions.

Why It's Used: The most essential cosmetic ingredient — aqua (water) is listed first on virtually all water-containing cosmetic inci labels as the highest-concentration ingredient, serving as the foundation of the global cosmetics industry.

How It Works: Acts as solvent for all water-soluble ingredients (glycols, amino acids, water-soluble actives). forms the continuous external phase of o/w emulsions (lotions, creams, serums). provides aqueous environment for enzymatic and chemical reactions between actives. ph adjustment medium.

Typically Found In: Virtually all cosmetic products — the most universal cosmetic ingredient globally

TECHNICAL DETAILS

Primary Category: Functional ingredient – water

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: Varies widely — up to 95% in some toners and serums

SOURCING & ETHICS

Vegan Status: Yes – water (deionised/purified)

Halal Status: Yes

Source Notes: Cosmetic-grade water is purified (deionised, distilled, or ro filtered) to prevent mineral content interference with formulation stability. european pharmacopoeial water (aqua purificata ph. eur.) is the quality standard for pharmaceutical and high-end cosmetic formulations.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – non-irritant

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Water's position as the first inci ingredient on most cosmetic labels reflects the regulatory requirement to list ingredients in descending concentration order — meaning water is the most abundant ingredient in the majority of cosmetic products. the fundamental role of water as the universal cosmetic solvent and vehicle makes it simultaneously the most important cosmetic ingredient and the one that requires the most sophisticated formulation chemistry to control — every emulsifier, thickener, preservative, and ph adjuster exists primarily to manage water's interaction with other ingredients in formulation.

Last Verified: Cosing database,eu cosmetics regulation 1223/2009 inci requirements,ph. eur. aqua purificata monograph

Primary Sources: 2026-03-12