Garnier Super UV Cooling Water Gel Sunscreen | 8-hr freshness | No White Cast | SPF 50 PA++++| 30 ml

DESCRIPTION

What It Does: Alcohol denat. dissolves oil-soluble and water-soluble cosmetic actives, provides rapid antimicrobial activity at concentrations above 60–70% by denaturing microbial proteins, delivers a refreshing cooling sensation through evaporative cooling on skin, and temporarily enhances the penetration of topical actives by transiently disrupting the stratum corneum lipid bilayer organisation.

Why It's Used: Formulators choose alcohol denat. for its irreplaceable combination of solvent power, antimicrobial activity, and penetration-enhancing properties. no other cosmetic solvent simultaneously provides the cooling sensory experience of alcohol (from evaporative cooling at the skin surface), the immediate antimicrobial activity required for sanitisers (from protein denaturation above 60%), and the transient sc lipid disruption that improves active ingredient delivery (essential in actives-rich toners and essences). for denatured alcohol specifically, denaturing agents (typically 5% isopropanol or bitrex) prevent consumption without affecting cosmetic function.

How It Works: Alcohol denat. works through multiple mechanisms depending on concentration: (1) solvent action — alcohol's hydroxyl group provides hydrogen bonding with water while the short alkyl chain provides interaction with organic solutes, enabling dissolution of both hydrophilic and moderately lipophilic cosmetic actives in a single solvent; (2) antimicrobial — above 60% concentration, ethanol denatures microbial proteins by disrupting non-covalent bonds maintaining protein secondary and tertiary structure — the alcohol molecules intercalate between protein chains, disrupting the hydrophobic interactions and hydrogen bonds that maintain enzyme active site geometry. this non-specific protein denaturation is immediately bactericidal and virucidal with no resistance mechanism possible; (3) sc penetration enhancement — at lower concentrations (5–30%), ethanol transiently fluidises the sc lipid bilayer by intercalating between the ordered lipid lamellae, disrupting the crystal packing and increasing lipid bilayer fluidity. this transient fluidisation increases the diffusion coefficient of co-applied actives through the sc for up to 30 minutes post-application; (4) astringency — alcohol's protein precipitating action at the skin surface contracts superficial proteins, temporarily tightening pores and reducing oiliness.

Typically Found In: Toners,hand sanitisers,actives serums

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 5%–95%

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Ethanol concentration-dependent antimicrobial efficacy: below 40% — minimal bactericidal effect (insufficient protein denaturation); 40–60% — bacteriostatic, not bactericidal; 60–70% — peak bactericidal efficacy against both enveloped and non-enveloped viruses and vegetative bacteria (optimal water content maintains protein hydration required for denaturation to proceed); 80–90% — remains effective but slightly reduced from decreased water activity; 95–100% — reduced efficacy (insufficient water for protein denaturation). the 70% 'sweet spot' for sanitisers reflects this concentration-efficacy peak, not a formulation convenience.

Last Verified: Cosing database,alcohol denat. ethanol solvent antimicrobial review

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Delivers targeted skin-conditioning or bioactive benefits through a specific mechanism of action suited to the formulation's intended purpose.

Why It's Used: Specialty actives address specific skin concerns through targeted molecular mechanisms, providing efficacy beyond what base formulation ingredients alone can achieve.

How It Works: The bioactive compound interacts with specific molecular targets in skin cells or the extracellular matrix — enzymes, receptors, structural proteins, or signaling molecules — triggering beneficial biological responses.

Typically Found In: Serums,treatments,moisturizers,specialty products

TECHNICAL DETAILS

Primary Category: Specialty actives

Secondary Functions: Skin-conditioning,anti-aging

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.01–5%

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Specialty active ingredient; check individual sourcing for vegan status.

SKIN COMPATIBILITY

Irritancy Rating: 1

Comedogenicity Rating: 0

Sensitivity Concerns: Low sensitization potential at recommended use concentrations.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Well-characterized cosmetic ingredient with established safety profile. generally non-irritating at typical use concentrations. suitable for leave-on and rinse-off cosmetics.

Works Well With: Niacinamide,hyaluronic acid,vitamin c,peptides

Avoid Combining With: Incompatible with oxidizing agents; check ph stability

SCIENTIFIC NOTE

Specialty actives typically work through enzyme inhibition (e.g., tyrosinase inhibition for brightening, mmp inhibition for anti-aging), receptor activation (e.g., retinoid receptors, ppar-γ for barrier genes), or transcription factor modulation (e.g., nrf2 for antioxidant gene upregulation). structure-activity relationships determine potency and selectivity.

Last Verified: Cosing eu database; pcpc cosmetic ingredient safety reviews; ingredient-specific safety and efficacy literature

Primary Sources: 2025-01-15

DESCRIPTION

What It Does: Provides stable gradual-release vitamin c activity for brightening and antioxidant protection.

Why It's Used: Most formulation-stable vitamin c derivative — ascorbyl glucoside remains stable in aqueous formulations where pure ascorbic acid oxidises within days, providing sustained vitamin c delivery over weeks of shelf life.

How It Works: Alpha-glucoside bond resists oxidation until cleaved by skin alpha-glucosidase enzymes. releases free l-ascorbic acid in viable epidermis. released ascorbic acid inhibits tyrosinase, stimulates collagen synthesis, and provides antioxidant activity. glucose group provides enhanced water solubility vs ascorbic acid.

Typically Found In: Stable vitamin c serums,brightening products,anti-aging

TECHNICAL DETAILS

Primary Category: Active ingredient – stable vitamin c glucoside

Secondary Functions: Tyrosinase inhibitor,collagen cofactor

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 1%–5%

SOURCING & ETHICS

Vegan Status: Yes – enzymatic synthesis from ascorbic acid and glucose

Halal Status: Yes

Source Notes: Synthetically produced vitamin c derivative.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Non-irritating; suitable for all skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Excellent safety profile. ewg score: 1.

Works Well With: Tocopherol,ferulic acid,niacinamide,spf

Avoid Combining With: No significant incompatibilities

SCIENTIFIC NOTE

Ascorbyl glucoside's stability advantage (18+ months in aqueous formulation vs days for ascorbic acid) arises from the glucose group's steric protection of ascorbic acid's c2 enediol that is the primary oxidation site. glucosidase cleavage in skin removes this protection in situ, releasing active ascorbic acid only where enzymatic activity exists — providing both formulation stability and bioactivation where needed.

Last Verified: Cosing database,yamamoto et al. ascorbyl glucoside stability study

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Delivers targeted skin-conditioning or bioactive benefits through a specific mechanism of action suited to the formulation's intended purpose.

Why It's Used: Specialty actives address specific skin concerns through targeted molecular mechanisms, providing efficacy beyond what base formulation ingredients alone can achieve.

How It Works: The bioactive compound interacts with specific molecular targets in skin cells or the extracellular matrix — enzymes, receptors, structural proteins, or signaling molecules — triggering beneficial biological responses.

Typically Found In: Serums,treatments,moisturizers,specialty products

TECHNICAL DETAILS

Primary Category: Specialty actives

Secondary Functions: Skin-conditioning,anti-aging

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.01–5%

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Specialty active ingredient; check individual sourcing for vegan status.

SKIN COMPATIBILITY

Irritancy Rating: 1

Comedogenicity Rating: 0

Sensitivity Concerns: Low sensitization potential at recommended use concentrations.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Well-characterized cosmetic ingredient with established safety profile. generally non-irritating at typical use concentrations. suitable for leave-on and rinse-off cosmetics.

Works Well With: Niacinamide,hyaluronic acid,vitamin c,peptides

Avoid Combining With: Incompatible with oxidizing agents; check ph stability

SCIENTIFIC NOTE

Specialty actives typically work through enzyme inhibition (e.g., tyrosinase inhibition for brightening, mmp inhibition for anti-aging), receptor activation (e.g., retinoid receptors, ppar-γ for barrier genes), or transcription factor modulation (e.g., nrf2 for antioxidant gene upregulation). structure-activity relationships determine potency and selectivity.

Last Verified: Cosing eu database; pcpc cosmetic ingredient safety reviews; ingredient-specific safety and efficacy literature

Primary Sources: 2025-01-15

DESCRIPTION

What It Does: Kills bacteria, fungi, and viruses on skin and within formulations through membrane disruption, protein denaturation, or enzyme inhibition — providing antiseptic, preservation, or therapeutic antimicrobial protection.

Why It's Used: Chosen when broad-spectrum antimicrobial coverage including gram-negative bacteria (particularly pseudomonas) is required, where standard cosmetic preservatives provide insufficient protection for challenge tests.

How It Works: Cationic biocides (qacs) adsorb electrostatically to negative microbial surfaces then insert hydrophobic chains into lipid bilayers, collapsing membrane potential. non-ionic biocides (triclosan) inhibit fatty acid synthesis (fabi enoyl reductase). oxidants (h₂o₂, chlorine dioxide) oxidise microbial thiol enzymes non-specifically.

Typically Found In: Antiseptics,therapeutic skin care

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: Check regulatory limits

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Regulatory limits vary significantly by compound and application — formulators must verify permitted concentrations in target market (eu annex v, fda otc monographs) before formulating at functional concentrations.

Last Verified: Cosing database,bis-ethylhexyloxyphenol methoxyphenyl triazine antimicrobial regulatory review

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides transparent gel textures and thickening at very low concentrations via ph-responsive swelling.

Why It's Used: The most widely used gel thickener – provides crystal-clear, stable gels at concentrations as low as 0.1-0.5% with ph-controlled viscosity.

How It Works: Highly crosslinked polyacrylic acid remains tightly coiled at acidic ph. neutralization with naoh or triethanolamine ionizes carboxylic groups causing electrostatic repulsion that unfolds and swells the polymer coils, dramatically increasing viscosity. concentration-dependent thickening.

Typically Found In: Gels,serums,emulsions,sunscreens

TECHNICAL DETAILS

Primary Category: Functional ingredient – polyacrylic acid thickener

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.1%–2%

SOURCING & ETHICS

Vegan Status: Yes – synthetic

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Carbomer's ph-responsive swelling mechanism provides an elegant formulation control tool: a neutralized gel can be liquefied by ph reduction (adding acid) and re-thickened by reneutralization. this reversible rheology control allows two-phase products that mix on application without the need for mechanical emulsification.

Last Verified: Cosing database,cir safety assessment

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides fatty alcohol emulsification and thickening for stable, well-textured emulsions.

Why It's Used: The most widely used fatty alcohol in cosmetics – provides emulsification, thickening, and emolliency simultaneously from a single ingredient with excellent safety profile.

How It Works: Forms bilayer lamellar structures in water with emulsifiers creating a viscous structured network that thickens and stabilizes emulsions. fatty alcohol emolliency provides direct skin conditioning. bilayer formation reduces inter-droplet coalescence in emulsions.

Typically Found In: Creams,lotions,conditioners – virtually all emulsion products

TECHNICAL DETAILS

Primary Category: Functional ingredient – fatty alcohol emulsifier/thickener

Secondary Functions: Barrier sealing,softening

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 1%–25%

SOURCING & ETHICS

Vegan Status: Yes – from vegetable or coconut/palm fatty acids

Halal Status: Yes

Source Notes: Plant-derived, synthetic or animal-derived. verify source.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 1/5 – low; formulation-dependent

Sensitivity Concerns: Non-irritating.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Excellent safety profile. ewg score: 1.

Works Well With: Humectants,ceramides,actives as carrier

Avoid Combining With: No significant incompatibilities

SCIENTIFIC NOTE

Cetearyl alcohol's ability to form lamellar liquid crystal structures ('krafft phases') with water and co-emulsifiers provides not only emulsion stability but also enhanced skin penetration via the lamellar skin barrier pathway. these crystalline structures can act as a reservoir for active ingredients, slowly releasing them as the lamellar structure melts on skin contact.

Last Verified: Cosing database,cir safety assessment

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Stabilises o/w emulsions by forming a molecular monolayer at the oil-water interface, provides co-emulsification synergy with other emulsifiers, and contributes to emulsion texture through interfacial film properties.

Why It's Used: Nonionic emulsifiers are preferred for sensitive skin and ph-extreme formulations — no ionic charge means no electrostatic interaction with skin proteins, no ph-dependent function loss, and compatibility with both anionic and cationic co-ingredients.

How It Works: Hlb determines emulsion type: hlb 8–12 for o/w emulsification; hlb 3–6 for w/o. the peg or glycoside head group provides hydrophilicity while the c16–c18 fatty chain provides lipophilicity. at the o/w interface, nonionic emulsifiers form a mixed monolayer reducing interfacial tension from ~35 mn/m (clean oil-water) to 5–10 mn/m, providing thermodynamic stabilisation.

Typically Found In: Creams,lotions,o/w emulsions

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 1%–10%

SOURCING & ETHICS

Vegan Status: Conditional

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Mixed emulsifier systems (e.g., glyceryl stearate + peg-100 stearate, or cetearyl glucoside + cetearyl alcohol) provide better emulsion stability than single emulsifiers — synergistic packing of different molecular geometries creates a more cohesive, mechanically robust interfacial film.

Last Verified: Cosing database,nonionic emulsifier hlb system review

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides the defining intense lemon-citrus fragrance note.

Why It's Used: The lemon scent compound – citral defines the fresh lemon scent in lemon essential oil and lemongrass with potent antimicrobial activity.

How It Works: Mixture of e-isomer (geranial) and z-isomer (neral). antimicrobial via michael addition to thiol enzymes. inhibits nf-kb for anti-inflammatory activity. antioxidant via allylic aldehyde.

Typically Found In: Citrus fragrances,antibacterial products,lemon-scented cosmetics

TECHNICAL DETAILS

Primary Category: Fragrance component – lemon aldehyde

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.001%–0.5%

SOURCING & ETHICS

Vegan Status: Yes – from lemon, lemongrass, melissa oils

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Eu cosmetics regulation: declared fragrance allergen. high sensitisation potential from alpha,beta-unsaturated aldehyde structure. ifra strict limits.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Citral's high sensitisation potential (llna ec3 ~0.11%) is a consequence of its alpha,beta-unsaturated aldehyde structure providing a highly reactive michael acceptor for skin protein covalent binding. the e/z mixture (geranial/neral) in natural citral means both isomers contribute to the sensitisation burden – explaining why lemongrass oil (very high citral content, ~60-80%) is one of the more common essential oil allergens.

Last Verified: Cosing database,ifra standards

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Absorbs uv radiation at specific wavelengths (uva 320–400 nm, uvb 290–320 nm) and dissipates photon energy as heat rather than skin-damaging photochemical reactions.

Why It's Used: Organic uv filters are chosen for their high molar extinction coefficient, specific spectral coverage, and formulation compatibility — individual filters are combined to provide broad-spectrum coverage across uva+uvb.

How It Works: Uv photon absorption by the aromatic chromophore π-system excites the molecule from s₀ ground state to s₁ excited state. rapid internal conversion or photoisomerisation dissipates energy as vibrational heat before it can initiate skin photodamage.

Typically Found In: Sunscreens,photoprotective products

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: Check local sunscreen regulations

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Organic uv filters require photostabilisation (by avobenzone-octocrylene pairing, or triazine stabilisers) as some absorbers degrade on uv exposure — formulator must verify photostability of the chosen filter combination.

Last Verified: Cosing database,diethylamino hydroxybenzoyl hexyl benzoate organic uv filter review

Primary Sources: 2026-03-12