DayWear Moisturizer Anti-Oxidant 72H-Hydration Sorbet Creme SPF 15

DESCRIPTION

What It Does: Alcohol denat. dissolves oil-soluble and water-soluble cosmetic actives, provides rapid antimicrobial activity at concentrations above 60–70% by denaturing microbial proteins, delivers a refreshing cooling sensation through evaporative cooling on skin, and temporarily enhances the penetration of topical actives by transiently disrupting the stratum corneum lipid bilayer organisation.

Why It's Used: Formulators choose alcohol denat. for its irreplaceable combination of solvent power, antimicrobial activity, and penetration-enhancing properties. no other cosmetic solvent simultaneously provides the cooling sensory experience of alcohol (from evaporative cooling at the skin surface), the immediate antimicrobial activity required for sanitisers (from protein denaturation above 60%), and the transient sc lipid disruption that improves active ingredient delivery (essential in actives-rich toners and essences). for denatured alcohol specifically, denaturing agents (typically 5% isopropanol or bitrex) prevent consumption without affecting cosmetic function.

How It Works: Alcohol denat. works through multiple mechanisms depending on concentration: (1) solvent action — alcohol's hydroxyl group provides hydrogen bonding with water while the short alkyl chain provides interaction with organic solutes, enabling dissolution of both hydrophilic and moderately lipophilic cosmetic actives in a single solvent; (2) antimicrobial — above 60% concentration, ethanol denatures microbial proteins by disrupting non-covalent bonds maintaining protein secondary and tertiary structure — the alcohol molecules intercalate between protein chains, disrupting the hydrophobic interactions and hydrogen bonds that maintain enzyme active site geometry. this non-specific protein denaturation is immediately bactericidal and virucidal with no resistance mechanism possible; (3) sc penetration enhancement — at lower concentrations (5–30%), ethanol transiently fluidises the sc lipid bilayer by intercalating between the ordered lipid lamellae, disrupting the crystal packing and increasing lipid bilayer fluidity. this transient fluidisation increases the diffusion coefficient of co-applied actives through the sc for up to 30 minutes post-application; (4) astringency — alcohol's protein precipitating action at the skin surface contracts superficial proteins, temporarily tightening pores and reducing oiliness.

Typically Found In: Toners,hand sanitisers,actives serums

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 5%–95%

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Ethanol concentration-dependent antimicrobial efficacy: below 40% — minimal bactericidal effect (insufficient protein denaturation); 40–60% — bacteriostatic, not bactericidal; 60–70% — peak bactericidal efficacy against both enveloped and non-enveloped viruses and vegetative bacteria (optimal water content maintains protein hydration required for denaturation to proceed); 80–90% — remains effective but slightly reduced from decreased water activity; 95–100% — reduced efficacy (insufficient water for protein denaturation). the 70% 'sweet spot' for sanitisers reflects this concentration-efficacy peak, not a formulation convenience.

Last Verified: Cosing database,alcohol denat. ethanol solvent antimicrobial review

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Absorbs uv radiation at specific wavelengths (uva 320–400 nm, uvb 290–320 nm) and dissipates photon energy as heat rather than skin-damaging photochemical reactions.

Why It's Used: Organic uv filters are chosen for their high molar extinction coefficient, specific spectral coverage, and formulation compatibility — individual filters are combined to provide broad-spectrum coverage across uva+uvb.

How It Works: Uv photon absorption by the aromatic chromophore π-system excites the molecule from s₀ ground state to s₁ excited state. rapid internal conversion or photoisomerisation dissipates energy as vibrational heat before it can initiate skin photodamage.

Typically Found In: Sunscreens,photoprotective products

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: Check local sunscreen regulations

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Organic uv filters require photostabilisation (by avobenzone-octocrylene pairing, or triazine stabilisers) as some absorbers degrade on uv exposure — formulator must verify photostability of the chosen filter combination.

Last Verified: Cosing database,butyl methoxydibenzoylmethane organic uv filter review

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides specialty silicone performance — elastomeric skin feel, water-soluble silicone activity, or enhanced hair cuticle conditioning — depending on the specific functional modification.

Why It's Used: Specialty silicones deliver performance profiles unavailable from standard dimethicone: amine-modified (amodimethicone) provides the strongest hair cuticle substantivity; crosslinked elastomers provide the unique velvet-bounce feel; peg-grafted forms provide water compatibility.

How It Works: Functional modification determines mechanism: amine groups (amodimethicone) electro-statically bind negatively charged hair cuticle providing substantive conditioning deposition; crosslinks create elastic network providing deformation-recovery (velvet feel); peg grafts increase hlb providing water miscibility.

Typically Found In: Hair conditioners,primers,specialty formulas

TECHNICAL DETAILS

Primary Category: Functional ingredient – emollient

Secondary Functions: Barrier sealing,softening

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.5%–20%

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Plant-derived, synthetic or animal-derived. verify source.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 1/5 – low; formulation-dependent

Sensitivity Concerns: Non-irritating.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Excellent safety profile. ewg score: 1.

Works Well With: Humectants,ceramides,actives as carrier

Avoid Combining With: No significant incompatibilities

SCIENTIFIC NOTE

Amodimethicone's amine groups have pka ~9 — at typical conditioner ph 4–5, they are fully protonated (–nh₃⁺) providing maximum cationic character for electrostatic attraction to negatively charged damaged hair cuticle.

Last Verified: Cosing database,specialty silicone performance review

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides antioxidant protection, anti-inflammatory activity, and skin conditioning from polyphenols, terpenoids, and phytochemicals in the extract.

Why It's Used: Natural plant extracts provide multi-functional phytochemical profiles supporting concurrent skin care claims from one ingredient with authentic botanical heritage.

How It Works: Polyphenols scavenge ros via h• donation; terpenoids inhibit nf-kb or cox inflammatory pathways; vitamins and minerals provide cofactor skin nutrition.

Typically Found In: Botanical skin care,natural products

TECHNICAL DETAILS

Primary Category: Active ingredient – antioxidant

Secondary Functions: Free radical scavenging,anti-aging

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.1%–30%

SOURCING & ETHICS

Vegan Status: Conditional

Halal Status: Conditional

Source Notes: Plant-derived extract or synthetic.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Non-irritating; well-tolerated.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Excellent safety profile. ewg score: 1.

Works Well With: Vitamin c,vitamin e,ferulic acid,spf,other antioxidants

Avoid Combining With: No significant incompatibilities

SCIENTIFIC NOTE

Plant secondary metabolites evolved for uv photoprotection and pathogen defence — mechanisms directly applicable to cosmetic antioxidant and anti-inflammatory activity in human skin.

Last Verified: Cosing database,cucumis sativus (cucumber) fruit ex botanical review

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Absorbs uv radiation at specific wavelengths (uva 320–400 nm, uvb 290–320 nm) and dissipates photon energy as heat rather than skin-damaging photochemical reactions.

Why It's Used: Organic uv filters are chosen for their high molar extinction coefficient, specific spectral coverage, and formulation compatibility — individual filters are combined to provide broad-spectrum coverage across uva+uvb.

How It Works: Uv photon absorption by the aromatic chromophore π-system excites the molecule from s₀ ground state to s₁ excited state. rapid internal conversion or photoisomerisation dissipates energy as vibrational heat before it can initiate skin photodamage.

Typically Found In: Sunscreens,photoprotective products

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: Check local sunscreen regulations

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Organic uv filters require photostabilisation (by avobenzone-octocrylene pairing, or triazine stabilisers) as some absorbers degrade on uv exposure — formulator must verify photostability of the chosen filter combination.

Last Verified: Cosing database,ethylhexyl salicylate organic uv filter review

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Glycerin pulls water from the environment and deeper skin layers into the outer skin layer (epidermis), boosting moisture levels and keeping skin soft, smooth, and plump.

Why It's Used: It is used in virtually every moisturizer, serum, and cleanser because it is highly effective at hydrating skin, is well-tolerated by all skin types, and enhances the texture and spreadability of formulations.

How It Works: As a humectant, glycerin forms hydrogen bonds with water molecules, trapping them in the skin. it also reinforces the skin barrier by integrating into lipid structures between skin cells.

Typically Found In: Moisturizers,serums,cleansers,toners,sheet masks,sunscreens,body lotions,shampoos,conditioners

TECHNICAL DETAILS

Primary Category: Humectant

Secondary Functions: Skin barrier support,emollient,solvent

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 1%–30% (typical: 3–10%)

SOURCING & ETHICS

Vegan Status: Yes – plant-derived (coconut, soy, palm) or synthetic

Halal Status: Yes – when plant-derived or synthetic; verify source with supplier

Source Notes: Derived from plant oils via hydrolysis or saponification; synthetic versions also available. palm-derived glycerin carries sustainability concerns.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low; non-irritating at all standard concentrations

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Extremely rare allergic reactions; generally safe for all skin types including sensitive and baby skin

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Widely recognized as safe. ewg hazard score: 1. no significant concerns for irritation, sensitization, or toxicity at typical concentrations (up to 50%).

Works Well With: Hyaluronic acid,ceramides,niacinamide,panthenol,urea,peptides,retinol,ahas/bhas

Avoid Combining With: No known incompatibilities at standard concentrations

SCIENTIFIC NOTE

Glycerin is an endogenous skin component found naturally in the stratum corneum. aquaporin-3 channels in keratinocytes facilitate glycerin transport, making it integral to natural skin hydration pathways.

Last Verified: Cosing database,cir safety assessment,ewg skin deep,inci decoder

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides uvb filtration and co-solvent function enabling higher uv filter concentrations in high-spf formulas.

Why It's Used: Spf enabler — homosalate's co-solvent function dissolves other uv filters more completely, enabling higher concentrations and therefore higher achievable spf in fluid-texture formulations.

How It Works: Cyclohexyl salicylate absorbs uvb (λmax 306nm, εmax 4,290 — moderate). also acts as oily co-solvent dissolving avobenzone, octinoxate, and other uv filters. photostable cyclohexyl structure.

Typically Found In: High-spf combination sunscreens

TECHNICAL DETAILS

Primary Category: Active ingredient – cyclohexyl salicylate uvb filter

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: Up to 15% (eu), 10% (us fda)

SOURCING & ETHICS

Vegan Status: Yes – synthetic

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Eu max 15% (sccs 2019 reduced limit). fda: 10%. potential endocrine activity at high concentrations. ewg score: 4.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Homosalate's maximum concentration in eu was reduced from 10% to 15% in sccs opinion 2019 (counter-intuitively raised, not reduced) specifically to enable effective uv filter dissolution — demonstrating that homosalate's primary value is as a co-solvent enabling other uv filters to function, not solely as a uv filter itself.

Last Verified: Cosing database,fda uv filter otc monograph,sccs homosalate opinion

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides uvb-uva-ii uv protection and essential avobenzone photostabilisation.

Why It's Used: The essential combination partner — octocrylene's dual uv filter + avobenzone photostabilisation function makes it virtually irreplaceable for durable broad-spectrum chemical sunscreens requiring uva-i coverage.

How It Works: Cyanocinnamate chromophore absorbs uvb-uva-ii (λmax 303nm). triplet energy transfer from excited avobenzone to octocrylene photostabilises avobenzone (>90% efficiency at 3:1 avobenzone:octocrylene ratio). hydrophobic character enhances water resistance.

Typically Found In: Broad-spectrum sunscreens,avobenzone-containing formulas

TECHNICAL DETAILS

Primary Category: Active ingredient – uv filter and photostabiliser

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: Up to 10% (eu), 10% (us fda)

SOURCING & ETHICS

Vegan Status: Yes – synthetic

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Eu max 10%. fda: 10%. ewg score: 3. recent benzophenone impurity concerns from aged product hydrolysis under study.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Octocrylene's triplet energy transfer photostabilisation of avobenzone operates via a dexter electron exchange mechanism: excited-state avobenzone (triplet) transfers excitation energy to octocrylene via orbital overlap, allowing avobenzone to return to its ground state uv-absorbing form without photodegradation. this energy transfer is only efficient at close molecular proximity — requiring intimate mixing of the two compounds in the formulation oil phase.

Last Verified: Cosing database,fda uv filter otc monograph,sccs octocrylene opinion

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides humectant moisture retention with antimicrobial preservative-boosting activity.

Why It's Used: The balanced multifunctional diol — pentylene glycol provides the ideal balance of humectancy and antimicrobial activity for clean beauty preservation systems with excellent sensory compatibility.

How It Works: C5 diol: longer chain than propylene glycol providing better antimicrobial activity but shorter than 1,2-hexanediol (slightly lower membrane activity). two oh groups provide humectant water binding. solvent for fragrances and some actives. synergistic with phenoxyethanol reducing required phenoxyethanol concentration.

Typically Found In: Clean beauty products,natural preservation systems,moisturisers

TECHNICAL DETAILS

Primary Category: Functional ingredient – multifunctional pentanediol

Secondary Functions: Tewl reduction,skin plumping

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.5%–3%

SOURCING & ETHICS

Vegan Status: Yes – synthetic

Halal Status: Yes

Source Notes: Synthetic or naturally derived. excellent aqueous solubility.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Non-irritating; suitable for all skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Excellent safety profile. ewg score: 1.

Works Well With: Ceramides,emollients,occlusives,glycerin,hyaluronic acid

Avoid Combining With: No significant incompatibilities

SCIENTIFIC NOTE

Pentylene glycol's position in clean beauty preservation is due to a regulatory quirk: 1,2-pentanediol is not classified as a preservative in eu cosmetics regulations (unlike phenoxyethanol which requires preservative listing), so it can provide antimicrobial activity while not requiring the 'contains preservative' designation — enabling cleaner labels in natural-positioned formulations.

Last Verified: Cosing database,dsm hydrolite-5 technical data,cir safety assessment

Primary Sources: 2026-03-12