After Sun Lotion

DESCRIPTION

What It Does: Alcohol denat. dissolves oil-soluble and water-soluble cosmetic actives, provides rapid antimicrobial activity at concentrations above 60–70% by denaturing microbial proteins, delivers a refreshing cooling sensation through evaporative cooling on skin, and temporarily enhances the penetration of topical actives by transiently disrupting the stratum corneum lipid bilayer organisation.

Why It's Used: Formulators choose alcohol denat. for its irreplaceable combination of solvent power, antimicrobial activity, and penetration-enhancing properties. no other cosmetic solvent simultaneously provides the cooling sensory experience of alcohol (from evaporative cooling at the skin surface), the immediate antimicrobial activity required for sanitisers (from protein denaturation above 60%), and the transient sc lipid disruption that improves active ingredient delivery (essential in actives-rich toners and essences). for denatured alcohol specifically, denaturing agents (typically 5% isopropanol or bitrex) prevent consumption without affecting cosmetic function.

How It Works: Alcohol denat. works through multiple mechanisms depending on concentration: (1) solvent action — alcohol's hydroxyl group provides hydrogen bonding with water while the short alkyl chain provides interaction with organic solutes, enabling dissolution of both hydrophilic and moderately lipophilic cosmetic actives in a single solvent; (2) antimicrobial — above 60% concentration, ethanol denatures microbial proteins by disrupting non-covalent bonds maintaining protein secondary and tertiary structure — the alcohol molecules intercalate between protein chains, disrupting the hydrophobic interactions and hydrogen bonds that maintain enzyme active site geometry. this non-specific protein denaturation is immediately bactericidal and virucidal with no resistance mechanism possible; (3) sc penetration enhancement — at lower concentrations (5–30%), ethanol transiently fluidises the sc lipid bilayer by intercalating between the ordered lipid lamellae, disrupting the crystal packing and increasing lipid bilayer fluidity. this transient fluidisation increases the diffusion coefficient of co-applied actives through the sc for up to 30 minutes post-application; (4) astringency — alcohol's protein precipitating action at the skin surface contracts superficial proteins, temporarily tightening pores and reducing oiliness.

Typically Found In: Toners,hand sanitisers,actives serums

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 5%–95%

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Ethanol concentration-dependent antimicrobial efficacy: below 40% — minimal bactericidal effect (insufficient protein denaturation); 40–60% — bacteriostatic, not bactericidal; 60–70% — peak bactericidal efficacy against both enveloped and non-enveloped viruses and vegetative bacteria (optimal water content maintains protein hydration required for denaturation to proceed); 80–90% — remains effective but slightly reduced from decreased water activity; 95–100% — reduced efficacy (insufficient water for protein denaturation). the 70% 'sweet spot' for sanitisers reflects this concentration-efficacy peak, not a formulation convenience.

Last Verified: Cosing database,alcohol denat. ethanol solvent antimicrobial review

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides humectant hydration and active ingredient solubilization with excellent skin feel.

Why It's Used: Preferred glycol humectant in premium and k-beauty formulations for superior skin feel vs propylene glycol with equivalent functionality.

How It Works: Two hydroxyl groups at 1,3-positions provide water binding and solvent activity. better tolerated than propylene glycol with minimal sensitization risk. 4-carbon backbone provides slightly greater hydrophobic character enabling dissolution of less polar actives vs pg.

Typically Found In: Toners,essences,serums,k-beauty formulas

TECHNICAL DETAILS

Primary Category: Functional ingredient – glycol humectant

Secondary Functions: Tewl reduction,skin plumping

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 1%–10%

SOURCING & ETHICS

Vegan Status: Yes – synthetic

Halal Status: Yes

Source Notes: Synthetic or naturally derived. excellent aqueous solubility.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Non-irritating; suitable for all skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Excellent safety profile. ewg score: 1.

Works Well With: Ceramides,emollients,occlusives,glycerin,hyaluronic acid

Avoid Combining With: No significant incompatibilities

SCIENTIFIC NOTE

K-beauty's preference for butylene glycol over propylene glycol is driven by two factors: bg's superior skin feel (less tacky than pg's higher viscosity) and its lower sensitization potential (1,3-bg has better spatial distribution of hydroxyl groups that reduces protein interaction vs pg's 1,2-position oh groups).

Last Verified: Cosing database,cir safety assessment

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Lightweight, stable emollient that solubilizes oil-soluble actives for excellent delivery without greasy feel.

Why It's Used: Universal lightweight emollient base and solubilizer for oil-soluble actives in serums and low-viscosity formulations where mineral oil or petrolatum would be too heavy.

How It Works: Medium-chain length provides ideal balance of spreading coefficient, penetration rate, and barrier-sealing properties. excellent solubilizer for vitamin e, retinoids, and other lipophilic actives.

Typically Found In: Serums,facial oils,sunscreens,anti-aging products,hair products

TECHNICAL DETAILS

Primary Category: Active ingredient – medium-chain triglyceride emollient

Secondary Functions: Active solubilizer,spreading agent

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 1%–50%

SOURCING & ETHICS

Vegan Status: Yes – from coconut/palm kernel oil

Halal Status: Yes

Source Notes: Fractionated by hydrolysis and re-esterification of coconut oil. only c8 and c10 fatty acids retained.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 1/5 – very low; medium-chain length generally non-comedogenic

Sensitivity Concerns: Non-irritating.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Excellent safety profile. ewg score: 1.

Works Well With: Humectants,ceramides,actives as carrier

Avoid Combining With: No significant incompatibilities

SCIENTIFIC NOTE

Mct oil's medium-chain length (c8/c10) provides superior oxidative stability vs longer polyunsaturated chains and better skin aesthetics (lighter, less greasy) vs longer chain emollients (c16/c18). excellent solubilizer for retinoic acid, tocopheryl esters, and other lipophilic actives.

Last Verified: Cosing database,cir safety assessment,ewg skin deep

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides fatty alcohol emulsification and thickening for stable, well-textured emulsions.

Why It's Used: The most widely used fatty alcohol in cosmetics – provides emulsification, thickening, and emolliency simultaneously from a single ingredient with excellent safety profile.

How It Works: Forms bilayer lamellar structures in water with emulsifiers creating a viscous structured network that thickens and stabilizes emulsions. fatty alcohol emolliency provides direct skin conditioning. bilayer formation reduces inter-droplet coalescence in emulsions.

Typically Found In: Creams,lotions,conditioners – virtually all emulsion products

TECHNICAL DETAILS

Primary Category: Functional ingredient – fatty alcohol emulsifier/thickener

Secondary Functions: Barrier sealing,softening

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 1%–25%

SOURCING & ETHICS

Vegan Status: Yes – from vegetable or coconut/palm fatty acids

Halal Status: Yes

Source Notes: Plant-derived, synthetic or animal-derived. verify source.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 1/5 – low; formulation-dependent

Sensitivity Concerns: Non-irritating.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Excellent safety profile. ewg score: 1.

Works Well With: Humectants,ceramides,actives as carrier

Avoid Combining With: No significant incompatibilities

SCIENTIFIC NOTE

Cetearyl alcohol's ability to form lamellar liquid crystal structures ('krafft phases') with water and co-emulsifiers provides not only emulsion stability but also enhanced skin penetration via the lamellar skin barrier pathway. these crystalline structures can act as a reservoir for active ingredients, slowly releasing them as the lamellar structure melts on skin contact.

Last Verified: Cosing database,cir safety assessment

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides a dry, weightless application vehicle that evaporates cleanly leaving actives and non-volatile silicones deposited on skin — eliminating the residual heaviness of conventional liquid carrier solvents.

Why It's Used: Cyclosiloxanes are the unique volatile silicone solvents that dissolve non-volatile silicones (dimethicone, cyclomethicone), organic uv filters, and lipophilic actives, providing the sensory-superior dry-touch application experience in premium formulations.

How It Works: Cyclosiloxane vapour pressure (d5 cyclopentasiloxane ~0.3 mmhg at 25°c) provides clean evaporation at body temperature. the cyclic ring structure provides lower boiling point than equivalent linear dimethicone, enabling faster evaporation while the ring conformation maintains the silicone's low surface energy for smooth application.

Typically Found In: Primers,antiperspirants,sunscreens

TECHNICAL DETAILS

Primary Category: Functional ingredient – emollient

Secondary Functions: Barrier sealing,softening

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 1%–50%

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Plant-derived, synthetic or animal-derived. verify source.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 1/5 – low; formulation-dependent

Sensitivity Concerns: Non-irritating.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Excellent safety profile. ewg score: 1.

Works Well With: Humectants,ceramides,actives as carrier

Avoid Combining With: No significant incompatibilities

SCIENTIFIC NOTE

Cyclopentasiloxane (d5) and cyclohexasiloxane (d6) are under eu regulatory review for potential environmental persistence (pbt assessment) — formulators should monitor eu regulation 2018/35 implementation for restrictions in wash-off products.

Last Verified: Cosing database,eu cyclosiloxane regulatory review

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Glycerin pulls water from the environment and deeper skin layers into the outer skin layer (epidermis), boosting moisture levels and keeping skin soft, smooth, and plump.

Why It's Used: It is used in virtually every moisturizer, serum, and cleanser because it is highly effective at hydrating skin, is well-tolerated by all skin types, and enhances the texture and spreadability of formulations.

How It Works: As a humectant, glycerin forms hydrogen bonds with water molecules, trapping them in the skin. it also reinforces the skin barrier by integrating into lipid structures between skin cells.

Typically Found In: Moisturizers,serums,cleansers,toners,sheet masks,sunscreens,body lotions,shampoos,conditioners

TECHNICAL DETAILS

Primary Category: Humectant

Secondary Functions: Skin barrier support,emollient,solvent

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 1%–30% (typical: 3–10%)

SOURCING & ETHICS

Vegan Status: Yes – plant-derived (coconut, soy, palm) or synthetic

Halal Status: Yes – when plant-derived or synthetic; verify source with supplier

Source Notes: Derived from plant oils via hydrolysis or saponification; synthetic versions also available. palm-derived glycerin carries sustainability concerns.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low; non-irritating at all standard concentrations

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Extremely rare allergic reactions; generally safe for all skin types including sensitive and baby skin

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Widely recognized as safe. ewg hazard score: 1. no significant concerns for irritation, sensitization, or toxicity at typical concentrations (up to 50%).

Works Well With: Hyaluronic acid,ceramides,niacinamide,panthenol,urea,peptides,retinol,ahas/bhas

Avoid Combining With: No known incompatibilities at standard concentrations

SCIENTIFIC NOTE

Glycerin is an endogenous skin component found naturally in the stratum corneum. aquaporin-3 channels in keratinocytes facilitate glycerin transport, making it integral to natural skin hydration pathways.

Last Verified: Cosing database,cir safety assessment,ewg skin deep,inci decoder

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides nmf amino acid skin conditioning and collagen-constituent support.

Why It's Used: The collagen amino acid — glycine is the most abundant amino acid in collagen (every third residue in the triple helix is glycine) making topical glycine the most physiologically relevant collagen-support amino acid.

How It Works: Nmf component via zwitterionic water retention. collagen triple helix requires gly-x-y repeat where glycine's small size allows close packing. wound healing via fibroblast glutathione synthesis support. anti-inflammatory via glycine-gated chloride channel activation (inhibitory neuromodulator).

Typically Found In: Skin conditioning products,wound healing,nmf moisturisers

TECHNICAL DETAILS

Primary Category: Active ingredient – simplest amino acid

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.5%–5%

SOURCING & ETHICS

Vegan Status: Yes – fermentation or synthetic

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Glycine's mandatory presence at every third position in collagen's triple helix (gly-x-y repeat) arises from its unique zero side-chain structure — only glycine is small enough to fit at the sterically restricted centre of the triple helix where the three polypeptide chains cross. no other amino acid can substitute for glycine in the collagen triple helix without disrupting the structure, making glycine irreplaceable in collagen biology.

Last Verified: Cosing database,cir safety assessment

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Nourishes and softens skin through its balanced fatty acid profile, while antioxidant compounds protect against oxidative skin damage.

Why It's Used: Plant oils provide physiologically compatible lipid structures that integrate into the skin barrier and deliver fat-soluble antioxidants directly to skin cells.

How It Works: Fatty acids integrate into stratum corneum lipid lamellae, reinforcing the lipid barrier. antioxidants (tocopherols, carotenoids, polyphenols) neutralize ros through electron donation or singlet oxygen quenching.

Typically Found In: Face oils,serums,moisturizers,hair treatments,body oils

TECHNICAL DETAILS

Primary Category: Plant oils

Secondary Functions: Emollient,antioxidant

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.5–30%

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Cold-pressed or solvent-extracted plant oil; no animal components.

SKIN COMPATIBILITY

Irritancy Rating: 1

Comedogenicity Rating: 2

Sensitivity Concerns: Low sensitization potential at recommended use concentrations.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Well-characterized cosmetic ingredient with established safety profile. generally non-irritating at typical use concentrations. suitable for leave-on and rinse-off cosmetics.

Works Well With: Vitamin e,ceramides,other plant oils,squalane

Avoid Combining With: Strong oxidizers (accelerate rancidity)

SCIENTIFIC NOTE

Vegetable oils are triglyceride matrices where the fatty acid composition determines skin compatibility, barrier function, and comedogenicity. oleic acid-rich oils (>60%) soften barrier lipids and enhance penetration; linoleic acid-rich oils reinforce ceramide-poor stratum corneum; saturated fatty acid-rich oils provide occlusion without skin penetration.

Last Verified: Cosing eu database; pcpc cosmetic ingredient safety reviews; aocs plant oil composition databases; fatty acid pharmacology reviews

Primary Sources: 2025-01-15

DESCRIPTION

What It Does: Provides stable vitamin e delivery with antioxidant activity after esterase hydrolysis in skin.

Why It's Used: The formulation-stable vitamin e — tocopheryl acetate's ester protection prevents oxidative degradation during shelf life while releasing active tocopherol in skin for equivalent biological activity.

How It Works: Acetate ester blocks the phenolic oh group responsible for oxidation and radical scavenging. skin esterases cleave acetate bond releasing free tocopherol. released tocopherol provides lipid peroxyl radical scavenging in cell membranes. also provides direct emollient and skin conditioning.

Typically Found In: Moisturisers,sunscreens,anti-aging products — extremely widespread

TECHNICAL DETAILS

Primary Category: Active ingredient – stable vitamin e ester

Secondary Functions: Free radical scavenging,anti-aging

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.1%–5%

SOURCING & ETHICS

Vegan Status: Conditional – natural from vegetable oils (soy, sunflower); synthetic dl-form

Halal Status: Yes

Source Notes: Plant-derived extract or synthetic.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Non-irritating; well-tolerated.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: The d-alpha-tocopheryl acetate (natural isomer) is biologically superior to dl-alpha-tocopheryl acetate (racemic synthetic) for skin antioxidant activity. ingredient label d- vs dl- prefix identifies natural vs synthetic origin.

Works Well With: Vitamin c,vitamin e,ferulic acid,spf,other antioxidants

Avoid Combining With: No significant incompatibilities

SCIENTIFIC NOTE

Tocopheryl acetate's conversion to active tocopherol in skin is quantitatively efficient: skin esterase activity is sufficient to cleave 60-80% of applied tocopheryl acetate within 24 hours of application. however, the conversion rate varies with skin condition (eczematous or barrier-compromised skin has reduced esterase activity), meaning tocopheryl acetate efficacy may be reduced precisely in the skin conditions that most need antioxidant support.

Last Verified: Cosing database,cir safety assessment

Primary Sources: 2026-03-12